Tunnel Business Magazine

JUN 2018

TBM: Tunnel Business Magazine is the market leader for North America. TBM is written for leading professionals in all aspects of tunneling and covers project stories, design elements, contracting strategies, legal issues, new technology and more.

Issue link: http://digital.tunnelingonline.com/i/986315

Contents of this Issue

Navigation

Page 29 of 51

TUNNELINGONLINE.COM TBM: TUNNEL BUSINESS MAGAZINE // JUNE 2018 entrusted a group of young engineers with the task of devising a new way. How was the new cutter mounting system better? The wedge was a beautiful thing. The key was getting the bolt or fastener out of the load path between the rock and the cutter. With the V-Block the bolts were in the load path, whereas on the Wedge-Lock the bolt was off to the side in the wedge and that greatly improved the situation for the bolt not to see fluctuating loads and break. This concept eventually would become the industry standard for all diameters of roller cutters. Where else did you work? I worked all over the world – in the United States, Africa, Asia, India and Europe; I even got to visit the Channel Tunnel while it was being constructed. Eventually I joined CTS in 1997, and then in 2006, I joined Herrenknecht after it purchased CTS. Joining Herrenknecht was a real eye-opener for me because up until that time I had only been involved with hard-rock cutting tools. At Herrenknecht, we work on all different types of cutting tools from static soft ground tools to roller cutters for shaft machines and small diameter machines. At our shop in Sumner we manufacture more than 60 different types of roller cutters from 6.5 to 20 in. in diameter. What are some of the more recent changes to cutters? The biggest right now is the availability of different cutting tips. There is the standard tool steel ring, but now we have a hard-faced tool steel and tungsten carbide insert with hard facing (TCI-HF). Tool steel is the most commonly used cutting tip and the best choice for most hard rock boring applications where high impact loads are expected. Hard faced tool steel is effective in soft, extremely abrasive rock like sandstone and completely decomposed granite. TCI- HF is often effective in boulder laden ground types like glacial till. The inserts "grip" soft ground and cause cutter to roll instead of slide. Another development has been in the area of pressure compensators. I was skeptical that pressure compensators would be effective in the underground environment when they are exposed to pressurized mud, dirt and water. But we supplied roller cutters that worked under 27 bar pressure for a shaft drilling job ada in which we used two types of pressure compensators – one piston-type compensator and one bladder-type compensator. At the end of the project we took apart the roller cutters and the cutters that had bladder compensators were still full of oil – not dirt and water like the cutters with the piston compensators so that proved to me that they work. Initially they were developed for deep mining shafts, but we have adapted them for that will mine the Rondout tunnel enknecht Lak ada. How does one select the right size cutter to use? On hard rock, typically you go as large as you can – 19-in. cutters if you can fit them. But as the diameter of the cutterhead gets smaller, below 5 m or so, it becomes difficult to fit 19-in. back-loading cutters so you have to go to a smaller cutter – 17 in. or smaller. For soft ground machines it is more an art of compromise. If you want a maximum amount of openings for driving in sand or clay, the available space for cutters is reduced. So, you need to weigh what you will expect as the predominant ground along with the likelihood of encountering boulders or lenses of hard rock or silt – it is a compromise. Ultimately the contractor will choose the set up he is most comfortable with, and that varies from contractor to contractor. Now that you know what size cutter, what other factors need to be considered? Once you have determined the cutter size, then you have to determine what kind of cutting structure to use - steel, hard face or tungsten carbide insert with hard facing. That comes down to the ground conditions. Beyond that you have to determine whether you want monoblock or replaceable ring cutters. Replaceable ring is the economical choice and start at 12 in. and go up to 20 in. Below 12 in. it has to be a monoblock as the rings get too weak, which is made of the same material that the replaceable disc rings are. Finally, you have to determine if other features are needed – whether to use pressure compensators or excluder seals, for example. There are all kinds of designs in order to keep the cutter rolling. That is the process we go through with customers. What's next in cutter technology? One new thing we are working on is a radio frequency ID tag (RFID) for cutters. The hardest thing about getting the RFID tag to work was finding one that would stand up to the underground environment. With the RFID tag and software we are developing, you can just point a reader at the cutter and it will tell you its history, like how many times it has been through the cutter shop and what parts have been used on it. It also helps with inventory management in the cutter shop. The first iteration will just be used for the shop but eventually we want to integrate that into the cutter changing process in the tunnel as well. The RFID technology will make it easier for the cutter shop personnel to make informed decisions about how the roller cutters get rebuilt. What steps can a contractor take to get the most life out of its cutters? The key is to be proactive and not reactive with maintenance, and it is important to change cutters before they block. On soft-ground machines sometimes that is difficult as contractors may want to push longer distances to avoid the time and expense of performing a hyperbaric intervention. Careful steering in hard rock conditions can also help ensure that individual cutters are not being point loaded, which could lead to failure. F E A T U R E S T O RY 3 0

Articles in this issue

Archives of this issue

view archives of Tunnel Business Magazine - JUN 2018